|
Three Phase Power Controller - Type EFS |
|
|
|
The EFS is a series of power controllers for controlling heating cables and electrical radiators.
The EFS is engineered using the latest technology, which provides several benefits such as accurate, noiseless control as well as long life expectancy. The EFS has often proved its value in applications where control of major electrical heating outputs has been required.
The EFS is not only ensuring the precise control of heating surfaces in ventilation and industrial plants but also in ceilings, floors and radiant heating etc. The EFS series has been developed to give our costumers an advantageous combination of high quality, accurate control at any heat requirement and low life cycle costs.
EFS FUNCTIONS |
|
|
|
Heat Sink Built Into Ductwork
Due to the flexible design of the EFS, it is possible build the heat sink into the ductwork of the ventilation system, thereby recycling the heat loss from the EFS to the air being heated by the heating elements. A special bracket is available for this purpose. |
|
|
|
Easy Installation
With the built-in P controller and built-in signal converter, the wiring required to install the EFS has been drastically reduced. All that is required is to connect the load and a temperature sensor, make the settings for the temperature control and then leave it on its own. If an external controller is available it can also be connected directly to the EFS power controller. |
|
|
|
No Electrical Noise
Due to the use of Zero transition triggering, there is no electrical noise from the EFS. And as an additional advantage, the mains cables to the EFS can be dimensioned for the current supplied to the heating elements with a very low installation factor. |
|
|
|
Built-in Power Doubling Relay
To further decrease the installation hassle, the EFS comes with a built-in relay for doubling the output of the controller. Simply connect 50% of the load to the relay and this load will be turned on, when there is a need for more than 50% heating. |
|
|
|
No Excesive Temperatures
Due to the modulation on the output, which the thyristors of the EFS provide, it is now possible to avoid the excessive temperatures, which are an unavoidable fact, when using solid-state relays. |
|
|
|
Unsymmetrical Loads
The EFS-9xx3 has a fully controlled output in all three phases and can sustain that unsymmetrical loads are connected. |
|
|
|
Low Life Cycle Cost
With the built-in thermal and transient protection and the modern technology of the EFS, the life expectancy of the power controller is 5 times that of a traditional solid-state relay. |
|
|
|
TECHNICAL DATA |
|
|
|
|
SUPPLY VOLTAGE |
VOLTAGE INPUT |
CURRENT INPUT |
|
230/400 VAC ± 10%, 50/60Hz |
0/2-10VDC, 10kOhm |
0/4-20 mA
(1 V voltage loss) |
|
TEMPERATURE RANGE |
SENSOR INPUT |
HEAT OUTPUT |
|
0 - +40°C |
NTC (use ETF-x99x)
0-10 VDC |
EFS-9xx2 approx. 2W/A
EFS-9xx3 approx. 3W/A
|
|
AMBIENT TEMPERATURE |
MINIMUM OUTPUT LOAD |
INSULATION
VOLTAGE |
|
-10 - +40°C |
400W |
2500 V RMS |
|
